LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Frame & Bumpers) >> Front Skid Plate >> Installation

Front Skid Plate: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position and support the skid plate at the front crossmember.
  2. Install the bolts that attach the skid plate to the transmission crossmember and tighten to 40 N.m (30 ft. lbs.).
  3. Install the bolts that attach the skid plate to the front crossmember and tighten to 40 N.m (30 ft. lbs.).
  4. Remove the support from under the skid plate.
scientia non olet · About LEMON Manuals