LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Air Bag Restraint Systems) >> Diagnostic Tests >> Test 1A: Accelerometer 1, Internal 1, Output Driver 1, Output Driver 2, SAFING Sensor, Stored Energy Firing 1, Stored Energy Firing 2, Stored Energy Logic

Test 1A: Accelerometer 1, Internal 1, Output Driver 1, Output Driver 2, SAFING Sensor, Stored Energy Firing 1, Stored Energy Firing 2, Stored Energy Logic

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Prior to performing any air bag system test, go to PRETEST INSPECTION & DIAGNOSTIC PROCEDURE  under DIAGNOSTICS. Perform TEST VER-1: AIR BAG VERIFICATION TEST  after all repairs unless otherwise directed.

Turn ignition switch to ON position. Using DRBIII, determine which control module is generating a Diagnostic Trouble Code (DTC). If Air Bag Control Module (ACM) is generating active or stored DTCs, replace appropriate control module. See AIR BAG CONTROL MODULE (ACM)  under REMOVAL & INSTALLATION.

scientia non olet · About LEMON Manuals