Parking Brake Cables (Front): Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Insert front cable through floor pan and install grommet.
- Insert cable retainer into hole at bottom of pedal assembly bracket and connect cable end.
- Fold floor covering down and install kick panel.
- Raise and support vehicle.
- Install support cable to the front cable to the front cable.
- Attach front cable to tensioner.
- Adjust parking brakes. See PARKING BRAKE CABLES under ADJUSTMENTS.
- Remove support and lower vehicle.