LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: If master cylinder is replaced bleed cylinder before installation. See MASTER CYLINDER BLEEDING  under BLEEDING BRAKE SYSTEM.
  1. Install master cylinder on booster mounting studs.
  2. Install mounting nuts. See TORQUE SPECIFICATIONS .
  3. Install brake lines. See TORQUE SPECIFICATIONS .
  4. Fill and bleed brake system. See BRAKE SYSTEM BLEEDING  under BLEEDING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals