Installation (4.7L)

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Clean throttle body-to-intake manifold "O" ring. Clean mating surfaces of throttle body and intake manifold.
Install throttle body to intake manifold by positioning throttle body to manifold alignment pins. Tighten three mounting bolts to specification. See TORQUE SPECIFICATIONS .
Install control cables. Install vacuum line to throttle body. Install electrical connectors. Install air duct/air box at throttle body.

Fig 1: Locating IAC Motor , IAT & TP Sensors (4.7L)

Courtesy of DAIMLERCHRYSLER CORP.