LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Removal, Overhaul & Installation) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Crankshaft Position Sensor Bolt
3.9L & 5.9L (1)
4.7L 21 (28)
Distributor Hold-Down Bolt 17 (23)
Driveshaft Crossmember Bolts 40 (54)
EVAP Canister-To-Mounting Bracket Nut 13-18 (17-24)
Fuel Pump Module Lock Nut 40 (54)
Fuel Rail Bolt
3.9L & 5.9L 17 (23)
4.7L 20 (27)
Fuel Tank Bolts 40 (54)
Fuel Tank Strap Nut 20-40 (27-54)
IAT Sensor 20 (27)
Oxygen Sensor 22 (30)
Power Steering Pressure Switch 10-17 (14-23)
Spark Plug
3.9L & 5.9L 26-30 (35-41)
4.7L 20 (27)
Throttle Body Bolts (3.9L & 5.9L) 17 (23)
Wheel Lug Nut 100 (136)
INCH Lbs. (N.m) 
Air Cleaner Housing-To-Throttle Body Clamp 96 (10.8)
Camshaft Position Sensor Bolt (4.7L) 106 (12)
ECT Sensor 8 (11)
EVAP Leak Detection Pump Screws 11 (1.2)
EVAP Purge Solenoid Nut 80 (9.0)
IAC Motor Bolt 60 (7.0)
Ignition Coil Bolt/Nut
3.9L & 5.9L (2)
4.7L 70 (8.0)
MAP Sensor Bolt 25 (3.0)
PCM Bolt 25-40 (3.0-5.0)
Throttle Body Bolt (4.7L) 100 (11.3)
TP Sensor Bolt 60 (7.0)
(1) Tighten retaining bolts to 70 INCH lbs. (8.0 N.m).
(2) On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m).