Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

BLEND OVERCURRENT (ACTIVE) - DIAGNOSTIC PROCEDURE

TEST	ACTION
1	View repair Repair With the DRBIII(R) in HVAC, System Tests, actuate the Actuator Circuit Test. Read the Actuator Circuit Test messages. Return to the symptom list and choose the symptom(s). If two or more drivelines are shorted together when running the Actuator Ckt Test, the DRBIII(R) may display Actuator Ckt Test Passed even though Overcurrent DTCs are active. If this occurs, refer to symptom Act Ckt Test Passed, Overcurrent DTCs Active. Perform BODY VERIFICATION TEST - VER 1 .

TEST

ACTION

View repair

Repair
1. With the DRBIII(R) in HVAC, System Tests, actuate the Actuator Circuit Test. Read the Actuator Circuit Test messages. Return to the symptom list and choose the symptom(s).
2. If two or more drivelines are shorted together when running the Actuator Ckt Test, the DRBIII(R) may display Actuator Ckt Test Passed even though Overcurrent DTCs are active. If this occurs, refer to symptom Act Ckt Test Passed, Overcurrent DTCs Active.
3. Perform BODY VERIFICATION TEST - VER 1 .