Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

DEMAGNETIZE COMPASS AS PER SERVICE INFORMATION - DIAGNOSTIC PROCEDURE

TEST	ACTION
1	NOTE: A blank compass display indicates that vehicle demagnetizing is required. NOTE: After demagnetizing, the vehicle will enter Auto Fast-Cal when the ignition is turned on. NOTE: Ensure that the correct compass variance is stored in the compass memory. See "Setting Compass Variance" in the Service Information. Refer to the Service Information for the Demagnetizing Procedure.View repair for Verification Test. Repair When the Demagnetizing Procedure is complete perform the Verification Test. Perform BODY VERIFICATION TEST - VER 1 .

TEST

ACTION

NOTE: A blank compass display indicates that vehicle demagnetizing is required.

NOTE: After demagnetizing, the vehicle will enter Auto Fast-Cal when the ignition is turned on.

NOTE: Ensure that the correct compass variance is stored in the compass memory. See "Setting Compass Variance" in the Service Information.

Refer to the Service Information for the Demagnetizing Procedure.View repair for Verification Test.

Repair
1. When the Demagnetizing Procedure is complete perform the Verification Test.
2. Perform BODY VERIFICATION TEST - VER 1 .