LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1997 >> Stratus Base, 2.4 X >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems - Except SEBRING Coupe >> Removal & Installation >> CLOCKSPRING >> Installation

Removal & Installation: CLOCKSPRING: Installation

  1. Ensure steering wheel and road wheels are in the straight ahead position. Install multi-function switch. Position clockspring onto steering shaft and push down on rotor until clockspring is fully seated on steering column.
  2. If clockspring centering adjustment is disturbed, adjust clockspring. See CLOCKSPRING CENTERING  under ADJUSTMENTS before installing steering wheel.
  3. Connect clockspring wiring connectors. Ensure wiring is routed properly. Install steering column shrouds. Install steering wheel, ensuring flats on steering wheel hub align with formations on inside of clockspring.
  4. Connect horn and speed control wires, and install speed control switches. Connect air bag wire (squib wire) to air bag module. Install air bag module.
  5. Tighten air bag module screws to specification. DO NOT connect negative battery cable yet. Perform system operation check to ensure air bag system is functioning properly. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals