LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Message Center (Service Information) >> Sensor, Ambient Temperature >> Installation

Sensor, Ambient Temperature: Installation

  1. Position the ambient temperature sensor in the vehicle.
    GC0192468Courtesy of CHRYSLER GROUP, LLC
  2. Install the fastener (1) that secures the ambient temperature sensor to the front bumper beam.
    GC0080152Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connector (1) to the ambient temperature sensor (2).
  4. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals