Belly Pan: Installation

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Base model shown in illustration, SRT models similar.

Position the front belly pan (2) to the underside of the vehicle.
Install the three push pin fasteners (2) that secure the front belly pan (2) to the underside of the vehicle's lower crossmember.
Install the eight screws (1) that secure the front belly pan (2) to the underside of the vehicle's front fascia.

Courtesy of CHRYSLER GROUP, LLC
Install the three fasteners (1) that secure the front belly pan (2) to the underside of the vehicle's wheelhouse inner. Repeat for the other side.

Courtesy of CHRYSLER GROUP, LLC

NOTE:
During installation, ensure rear belly pan is shingled underneath front belly pan. Failure to do so may result in damage to belly pan.
Position the rear belly pan (2) to the underside of the vehicle and to the front belly pan.
Install the fasteners (1) that secure the rear belly pan (2) to the underside of the vehicle. Tighten the fasteners securely.
Lower the vehicle.