LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (6.7L Diesel - DTCS - P0008 To P040C - 3500 Cab & Chassis) >> Diagnosis and Testing >> P0016-Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1 >> Code Description >> When Monitored:

When Monitored:

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

While engine is running. The Powertrain Control Module (PCM) monitors the position of the notch on the crankshaft speed sensor target and the camshaft speed sensor target. If the two positions do not match, the PCM then determines that there is a mechanical mis-alignment between the two sensors.

scientia non olet · About LEMON Manuals