If a 2.8L Controller was replaced, navigate to "Misc. Functions" and perform all applicable routines:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The available routines may vary depending on model and year of vehicle.

PCM/ECM Replaced - Located within the Security Module
ECU Replacement With Value Transfer - if the ECU to be replaced is still responsive
NOTE:
If the PCM/ECM data transfer is able to be completed, it may not be necessary to perform routines 6 - 8.
ECU Replacement Without Value Transfer - if the ECU to be replaced is NOT responsive
Injector Quantity Adjustment
Program Variant Code
Fuel Mean Value Adaptation Initialization
IMA Rapid Calibration Test
Set Oil Dilution Mass Value