LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (6.7L Diesel - DTCS P2000 To U1601 - 2500 & 3500) >> Diagnosis and Testing >> P2127-Accelerator Pedal Position Sensor 2 Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
(F856) 5-VOLT SUPPLY CIRCUIT OPEN/HIGH RESISTANCE
(F856) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(K29) APP SENSOR 2 SIGNAL CIRCUIT OPEN/HIGH RESISTANCE
(K29) APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO GROUND
(K29) APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO THE (K167) APP SENSOR 1 RETURN CIRCUIT
(K29) APP SENSOR 2 SIGNAL CIRCUIT SHORTED TO THE (K400) APP SENSOR 2 RETURN CIRCUIT
APP SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE - 6.7L  .