LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 726 (5.7L - DTCS P2107 To U1449 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P258E-PTO Enable Switch Performance >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle running, system voltage is between 10 and 16 volts, engine speed (CAN Message) is greater than 550 RPM, No CAN bus or PCM communication failures, the PTO enable request from the ICS was ON at some point during the current trip, the PCM is commanding the TCM to enable PTO operation.

scientia non olet · About LEMON Manuals