Diagnostic Test

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY DTC IS ACTIVE
NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
1. Turn the ignition on.
2. With the scan tool, read the active DTCs.
  Does the scan tool display; U0140-LOST COMMUNICATION WITH BODY CONTROL MODULE as active?
  
  Yes
  - Refer to DIAGNOSIS AND TESTING and perform the NO RESPONSE FROM BCM (BODY CONTROL MODULE) diagnostic procedure.
  No
  - Refer to DIAGNOSIS AND TESTING and perform the Stored Lost Communication DTCs diagnostic procedure.