LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (6.7L - DTCS P0606 To P2262 - 2500 & 3500) >> Diagnosis And Testing >> P21B3-Closed Loop NOX Absorber Control At Limit - Too High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

If the time duration after an active soot regeneration is requested exceeds a calibrated threshold and the Diesel Oxidation Catalyst inlet temperature has not reached the light off temperature threshold to begin closed loop control.

scientia non olet · About LEMON Manuals