LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1682 (Power Seats - (Service Information) - 2500 Hd) >> Motor, Seat Adjuster >> Removal >> Front Tilt Motor

Front Tilt Motor

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0087713Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the affected seat. Refer to SEAT, FRONT CENTER, REMOVAL .
  3. Remove the affected seat cushion cover, cushion and pan.
  4. Disconnect the electrical connector from the front tilt motor (1).
  5. Remove the screws retaining the front tilt motor to the seat adjuster.
  6. Remove the front tilt motor from the seat adjuster.
scientia non olet · About LEMON Manuals