Lamp, Courtesy, Seat: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The courtesy lamp (1) is illuminated by an LED and is only serviced as an LED unit.
- Disconnect and isolate the battery negative cable.
- Remove the affected rear seat cushion cover to access the led assembly. Refer to COVER, SEAT CUSHION, MEGA CAB REAR, REMOVAL
.
- Position the seat bottom to the folded up position.
- Looking at seats outboard frame riser; disconnect the seat lamp wiring connector (1) at this location from the wiring harness.
- The LED lamp harness is protected by a soft lining cover. The lamp and harness needs to be pulled through this cover to complete the removal procedure.