Fascia, Front: Removal: Upper
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Sport fascia shown, upper fascia similar.
- Remove the push pins (3) and position the wheelhouse splash shield (2) aside.NOTE:
Sport fascia shown, upper fascia similar.
- Remove the fender screws (1).
- Remove the grille. Refer to GRILLE, REMOVAL .
- Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the upper clips and remove the fascia (4).