Fascia, Front: Removal: Sport

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Remove the push pins (3) and position aside the wheelhouse splash shields (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the screws (1) and separate the fascia (3) from the fender (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the four lower fasteners (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the grille. Refer to GRILLE, REMOVAL .
Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the upper clips and remove the fascia (4).