LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1625 (Frame And Bumpers - 2500 Hd) >> Bumpers >> Bumper, Front >> Removal >> 2500 - 5500 Heavy Duty

2500 - 5500 Heavy Duty

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0137147Courtesy of CHRYSLER GROUP, LLC
  1. Remove the grille. Refer to GRILLE, REMOVAL .
  2. Disconnect the electrical connectors (1), if equipped.
  3. Remove the eight nuts (2) and remove the bumper.
    GC0158169Courtesy of CHRYSLER GROUP, LLC
  4. Remove the rear (1) and the front (2) push pin fasteners.
    GC0158117Courtesy of CHRYSLER GROUP, LLC
  5. Remove the four fasteners (2) and remove the front shroud (1).
    GC0158196Courtesy of CHRYSLER GROUP, LLC
  6. Remove the four fasteners (1) and remove the rear shroud (2).
    GC0158111Courtesy of CHRYSLER GROUP, LLC
  7. Remove the two upper charge air cooler bolts (1).
    GC0158103Courtesy of CHRYSLER GROUP, LLC
  8. Remove the bracket bolts (1) and the two brackets (2).
  9. Position the charge air cooler aside.
    GC0137148Courtesy of CHRYSLER GROUP, LLC
  10. Remove the nuts (1) and bolts (2) and remove the tow hooks (3), if equipped.
    GC0158042Courtesy of CHRYSLER GROUP, LLC
  11. Remove the bumper bracket support nuts (1).
    GC0158200Courtesy of CHRYSLER GROUP, LLC
  12. As necessary, position aside the charge air cooler (2).
  13. Remove the bolt assemblies (1).
    GC0158052Courtesy of CHRYSLER GROUP, LLC
  14. Remove the bumper brackets (2) from the frame tips (1).
scientia non olet · About LEMON Manuals