LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1598 (Instrument Cluster - (Service Information) - 2500 Hd) >> Pod, Switch >> Installation

Pod, Switch: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the switch pod to the instrument panel center bezel.
    GC0154419Courtesy of CHRYSLER GROUP, LLC
  2. Install the switch pod fasteners (1) and (4) to the center bezel.
  3. Connect the switch pod electrical connectors (2) and (3).
  4. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals