LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Emissions Control) >> Exhaust Gas RECIRCULATION >> Valve, Exhaust Gas RECIRCULATION (EGR) >> Installation

Valve, Exhaust Gas RECIRCULATION (EGR): Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0174017Courtesy of CHRYSLER GROUP, LLC
  1. Install a NEW  EGR gasket (1).
    GC0173995Courtesy of CHRYSLER GROUP, LLC
  2. Install the EGR valve. Tighten nut and bolts (1) to 9 N.m (80 in. lbs.).
    GC0174004Courtesy of CHRYSLER GROUP, LLC
  3. Connect the EGR valve wire harness connector (1).
    GC0174021Courtesy of CHRYSLER GROUP, LLC
  4. Position the coolant hose (1, 3) and install the nut (2) and tighten to 9 N.m (80 in. lbs.).
  5. Install the front EGR tube. Refer to TUBE, EXHAUST GAS RECIRCULATION (EGR), CROSSOVER, INSTALLATION .
  6. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION, 6.7L .
  7. Install the engine cover.
  8. Connect negative battery cable.
scientia non olet · About LEMON Manuals