Pump, Engine Oil: Installation
WARNING: This page is about a different car, the 2018 RAM 2500 HD and 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Gently push the oil pump upwards and press firmly against the engine block. Finger tighten all of the oil pump retaining bolts to ensure the oil pump is fixed in it's position.
- Using the sequence shown, tighten the oil pump bolts to 28 N.m (21 ft. lbs.).
- Install the timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION .
- Install the oil pan. Refer to PAN, OIL, INSTALLATION .