LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Distribution >> Duct, Floor Console >> Installation

Duct, Floor Console: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0083799Courtesy of CHRYSLER GROUP, LLC
NOTE:

Illustration shown with center front seat removed for clarity.

  1. If removed, install the rear duct (2) onto the rear outlet (4). Make sure the duct is fully engaged to the outlet.
  2. Install the three push-pin retainers (1) that secure the rear duct to the front seat support (3) and install the front seat. Refer to SEAT, MEGA CAB REAR, INSTALLATION .
    GC0089532Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Illustration shown with seat cushions removed for clarity.

    NOTE:

    Automatic transmission models shown. Manual transmission model similar.

  3. Install the floor console duct (1) onto the rear floor distribution duct (5). Make sure the ducts are fully engaged to each other.
  4. Engage the floor console duct onto the stud (4).
  5. Slide the rear duct adapter (3) forward and install the floor console duct onto the rear duct (2). Make sure the ducts are fully engaged to each other.
  6. Install the floor console. Refer to CONSOLE, FLOOR, LID, INSTALLATION .
scientia non olet · About LEMON Manuals