Seat, Mega Cab Rear: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Install the seat assembly (1) into the vehicle and position over the front stud (2).

Fig 1: Seat Assembly Bolts & Nut & Tightening Sequence
Courtesy of CHRYSLER GROUP, LLC
Install the nut (2) and bolts (1).
Tighten the fasteners to 47.5 N.m (35 ft. lbs.) using the sequence shown in the illustration.

Courtesy of CHRYSLER GROUP, LLC
Install the rear bolts and tighten to 47.5 N.m (35 ft. lbs.).