LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Controls >> Sensor, Temperature, In-Car >> Installation

Sensor, Temperature, In-Car: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Take the proper precautions to protect the face of the steering column opening cover from cosmetic damage while performing this procedure.

GC0154421Courtesy of CHRYSLER GROUP, LLC
  1. Position the in-car temperature sensor (2) onto the steering column opening cover (3).
  2. Install the two screws (1) that secure the in-car temperature sensor to the steering column opening cover. Tighten the screws securely.
    GC0154411Courtesy of CHRYSLER GROUP, LLC
  3. Connect the electrical connector (1) to the temperature sensor (2).
  4. Install the steering column opening cover (3). Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals