LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (6.4L Engine - (Service Information) - 2500 Hd) >> Lubrication >> Pump, Engine Oil >> Installation

Pump, Engine Oil: Installation

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Pump Retaining Bolt Tightening Sequence
GC0088115Courtesy of CHRYSLER GROUP, LLC
  1. Gently push the oil pump upwards and press firmly against the engine block. Finger tighten all of the oil pump retaining bolts to ensure the oil pump is fixed in it's position.
  2. Using the sequence shown, tighten the oil pump bolts to 28 N.m (21 ft. lbs.).
  3. Install the timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION  .
  4. Install the oil pan. Refer to PAN, OIL, INSTALLATION  .
scientia non olet · About LEMON Manuals