LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (6.4L Engine - (Service Information) - 2500 Hd) >> Engine Block >> FLEXPLATE >> Installation >> Non-High Output Engine

Non-High Output Engine

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161603Courtesy of CHRYSLER GROUP, LLC
NOTE:

A new bolts (1), clamp ring (2) must be used anytime the flex plate has been removed. Do not lubricate new bolts as they are already coated with an anti-scuff treatment.

NOTE:

Align the flex plate to hub paint marks, where applicable.

  1. Install the flex plate (4), friction shim (3), clamping ring (2) and tighten bolts (1) finger tight.
  2. Use a crisscross pattern to tighten bolts to 137 N.m (101 ft. lbs.).
  3. Install the transmission (Refer to 66RFE Transmission INSTALLATION and BW44-46 Transfer Case INSTALLATION or BW44-47 Transfer Case INSTALLATION ).
scientia non olet · About LEMON Manuals