LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1576 (6.7L Engine (Service Information) - 2500 Hd) >> Lubrication >> Switch, Oil Pressure >> Removal

Switch, Oil Pressure: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0161525Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate both of the negative battery cables.
  2. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 6.7L .
  3. Disconnect the oil pressure switch wire harness connector (1).
  4. Remove the oil pressure switch (2) from the engine oil cooler housing.
scientia non olet · About LEMON Manuals