LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1569 (Engine Cooling System - 2500 Hd) >> Engine >> Sensor, Coolant Temperature >> Installation >> 6.7L Diesel

6.7L Diesel

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0155244Courtesy of CHRYSLER GROUP, LLC
  1. Install the Engine Coolant Temperature (ECT) sensor (1). Tighten sensor (2) to 18 N.m (13 ft. lbs.).
    GC0155284Courtesy of CHRYSLER GROUP, LLC
  2. Connect the ECT sensor wire harness connector (1).
    GC0155347Courtesy of CHRYSLER GROUP, LLC
  3. Install the heat shield (2). Tighten bolts (1) to 9 N.m (80 in. lbs.).
  4. Install the upper EGR tube (1). Refer to INSTALLATION .
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
    GC0161582Courtesy of CHRYSLER GROUP, LLC
  6. Install the engine cover (3). Tighten bolts (1) to 10 N.m (89 in. lbs.).
  7. Install the engine oil dip stick (2).
  8. Connect both negative battery cables.
scientia non olet · About LEMON Manuals