LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1569 (Engine Cooling System - 2500 Hd) >> Engine >> Pump, Water >> Removal >> 6.7L Diesel

6.7L Diesel

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate both of the both negative battery cables.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .
  4. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 6.7L .
    GC0179986Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The water pump is removed by sliding it under the generator pulley.

  5. Remove the bolts (1, 3) and the water pump (2).
  6. Remove and discard the O-ring seal.
scientia non olet · About LEMON Manuals