6.7L Diesel Engine
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate both of the negative battery cables.
- Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 6.7L .
- A 1/2 inch square hole is provided in the automatic belt tensioner (6). Attach a suitable tool into this hole.
- Rotate tensioner assembly clockwise (as viewed from front) until tension has been relieved from belt.
- Remove belt from water pump pulley first.
- Remove belt from engine.