Channel, Sunroof Drain: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Left side shown in the illustration, right side typical.
- Carefully position the drain channel (1) one side at a time into the notches (2) in the track assembly. Once positioned, push down until it engages into the track assembly. Repeat steps on the opposite side and slide the drain channel assembly rearward.
- Install the drain channel arms (2) into the mechanism holes (1) one at a time.CAUTION:
Do not push the guide arms at the same time or you could break the guide mechanism. Do not use excessive force to install.
- Install the sunroof glass. Refer to GLASS, SUNROOF, INSTALLATION .