Glass, Sunroof: Installation
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position glass panel (2) on to mechanism lift arms (1).CAUTION:
Verify that the retaining tabs are located on the INSIDE of the guide mechanism arms.
- Start the attaching screws (3).
- Connect a 12v power supply and verify that the sunroof is in the closed position.
- Adjust sunroof glass to fit flush with roof line. Refer to GLASS, SUNROOF, ADJUSTMENTS .
- Tighten the screws (3) to 3.5 N.m (30 in. lbs.).
- Position the mechanism covers (2) over the glass tabs (1) between the locating features and seat fully.
- Verify sunroof operation and alignment.