Stationary Glass: Windshield: Removal
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove inside rear view mirror (3). Refer to MIRROR, REARVIEW, REMOVAL .
- Remove cowl grille (2). Refer to COVER, COWL PANEL, REMOVAL .
- Remove the A-pillar weatherstrip retainer (1).
- Remove the A-pillar trim panels (2). Refer to PANEL, A-PILLAR TRIM, WITH GRAB HANDLE, REMOVAL .
- Lower the headliner (9) as needed and using windshield removal tool such as an extractor or equivalent, start at the rear section of the glass and work around the parameter to remove urethane. A pneumatic cutting device can be used but is not recommended. Refer to HEADLINER, REMOVAL .
- Separate windshield from vehicle.