Rear Doors: Adjustments: Fore/Aft

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Fore/aft (lateral) door adjustment is done by loosening the hinge to the hinge pillar fasteners one hinge at a time and moving the door to the correct position.

Support the door with a suitable lifting device.
Loosen the upper and lower (2) hinge to hinge pillar fasteners. Refer to HINGE, DOOR, REMOVAL .
Adjust the door to the correct position. Refer to GAP AND FLUSH, SPECIFICATIONS .
Tighten the remaining hinge to hinge pillar bolts (2) to 24 N.m (18 ft. lbs.).