LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> Exterior >> Grille, Active Shutter >> Removal

Grille, Active Shutter: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0154357Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Damage can occur to the actuator's gears by twisting the active grille shutter's louvers/vanes.

NOTE:

When replacing the Active Grille Shutter (AGS) assembly or AGS actuator with a service part it will be necessary to perform a counter reset with a scan tool. Follow the scan tool prompts as located under PCM/Misc. Functions/Active Grill Shutter Replace.

  1. Remove the grille. Refer to GRILLE, REMOVAL .
  2. Separate the hood switch (1) and position aside.
    GC0154396Courtesy of CHRYSLER GROUP, LLC
  3. Remove the upper (1) and lower bolts (2) and tip the top of the AGS assembly down towards the front of the vehicle.
    GC0154644Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the electrical connector (3) and position aside the wire harness (2).
  5. Lift the AGS assembly off the lower hooks (1) and remove the assembly.
scientia non olet · About LEMON Manuals