LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Body - Interior & Exterior - 2500 Hd) >> DECKLID/Hatch/Liftgate/Tailgate/Swing Gate >> Handle, Latch Release >> Removal

Handle, Latch Release: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0086821Courtesy of CHRYSLER GROUP, LLC
  1. Open the tailgate and remove the tailgate liner, if equipped, and cover. Refer to COVER, TAILGATE, INSTALLATION .
  2. Using a grease pencil or equivalent, mark the location of the actuator rods (2) at the control.
  3. Disconnect the actuator rods from the control.
    GC0088939Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the backup camera electrical connector (1), if equipped.
    GC0086820Courtesy of CHRYSLER GROUP, LLC
  5. Remove the two nuts (3) that secure the release handle (1) and the control (2) to the tailgate.
  6. Remove the control (2) and the release handle (1) from the tailgate.
scientia non olet · About LEMON Manuals