Cooler, Power Steering: Removal: Gas
WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Drain and siphon the power steering fluid.
- Remove the grille. Refer to GRILLE, REMOVAL .
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- If equipped, remove the eight lower engine splash shield push pins (1) and remove the splash shield (2).
- Disconnect the return and supply hoses connected to the power steering fluid cooler lines.
- Remove the mounting bracket bolts (1) securing the fluid cooler (2) to the brace.
- Remove the fluid cooler (2) from the vehicle.