Section 437 (6.7L Diesel - AFTERTREATMENT Validation, Mil Light On Pretest Procedure, Pre-Diagnostic Troubleshooting Procedure, Pcm/ECM/TCM Programming, Powertrain Verification Test & Intermittent Condition - 2500 Hd & 3500 Hd)
WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Standard Procedure
- Diesel AFTERTREATMENT Validation- 6.7L
- Mil Light On Pretest Procedure
- Pre-Diagnostic Troubleshooting Procedure - 6.7L
- Pcm/ECM / TCM Programming
- Pcm/ECM / TCM Flash PROGRAMING
- Table Of Contents
- Section 1 - Pcm/ECM/TCM Flash Procedure
- Repair Procedure - Using STARSCAN® Or STARMOBILE® Desktop Client
- Repair Procedure - WITECH™ Diagnostic Application
- Section 2 - Additional Pcm/ECM / TCM Replacement Procedures
- Step-By-Step Instructions
- Section 3 - Authorized Modification Label
- Required Tools / Equipment:
- Tech Tips And Information:
- Parts Required
- Powertrain Verification Test - 6.7L
- Intermittent Condition - 6.7L