LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (5.7L CNG - DTCS P060B To P2128 - 2500 Hd) >> Diagnosis And Testing >> P2122-Accelerator Pedal Position Sensor 1 Circuit Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 2500 HD and 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects that the APP Sensor 1 input voltage is below the minimum acceptable value. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals