LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (5.7L CNG - DTCS P060B To P2128 - 2500 Hd) >> Diagnosis And Testing >> P0703-Brake Switch 2 Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 2500 HD and 2012 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

When the Powertrain Control Module (PCM) recognizes Brake Switch voltage is not equal to the applied value at the PCM when Brake Switch is applied. This could be a normal condition. If this condition is seen repeatedly by the PCM the fault is set. Cruise will not work for the rest of the key cycle. One trip fault.

scientia non olet · About LEMON Manuals