Diagnostic Test
WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- INITIALIZE ANTI-LOCK BRAKES MODULE
- Initialize the ECU, Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST
.
Does this DTC reset?
Yes
- Replace the Anti-Lock Brake System (ABS) Module in accordance with the Service Information.
- Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST .
No
- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.
- Initialize the ECU, Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST
.