LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Vehicle Theft Security System (Service Information)) >> Siren - Export >> Removal

Siren - Export: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/ Installing Vehicle Theft Security Siren
GC0041446Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the left front wheel well splash shield (Refer to BODY/EXTERIOR/FRONT END SPLASH SHIELDS - REMOVAL) .
  3. Remove the air blocker to see siren (1).
  4. Disconnect the siren electrical connector.
  5. Remove the siren retaining screws (2) and remove the siren (1) from the vehicle.
scientia non olet · About LEMON Manuals