LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> Exterior >> Splash Shield-Front Wheelhouse >> Removal

Splash Shield-Front Wheelhouse: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Right hand splash shield shown in illustration. Left hand similar.
Fig 1: Front Wheelhouse Splash Shield
GC0022348Courtesy of DAIMLERCHRYSLER CORP.
  1. Hoist and support the vehicle.
  2. Remove the front wheel from the side of the vehicle being serviced (Refer to TIRES/WHEELS - REMOVAL) .
  3. Remove the push-pin fasteners that secure the front wheelhouse splash shield (2) to the frame rail forward of suspension.
  4. Remove the push-pin fasteners that secure the front wheelhouse splash shield to frame rail rearward of suspension.
  5. Remove the screws that secure the front wheelhouse splash shield to the front fender (1) and remove the splash shield.
scientia non olet · About LEMON Manuals