Front Bumper Reinforcement: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - U-NUT(S) |
| 2 - FRONT BUMPER FASCIA REINFORCEMENT |
- Place bumper reinforcement (2) in position.
- Install bolts attaching reinforcement (2) to rail assembly (1).
- Install front fascia (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION) .
- Install grille (Refer to BODY/EXTERIOR/GRILLE - INSTALLATION) .