LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Interior & Exterior (1 Of 2)) >> DECKLID/Hatch/Liftgate/Tailgate >> Bezel-Handle >> Installation

Section 79 (Interior & Exterior (1 Of 2)): DECKLID/Hatch/Liftgate/Tailgate: Bezel-Handle: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Decklid
GC0022282Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the handle bezel (4) to the decklid (3) and install the three retaining nuts (5). Tighten the nuts securely.
  2. Position the emblem (2) to the decklid and install the two retaining nuts (1). Tighten the nuts securely.
  3. Install the decklid trim panel (Refer to BODY/DECKLID/PANEL-TRIM - INSTALLATION)  .
  4. Close the decklid.
scientia non olet · About LEMON Manuals