Section 79 (Interior & Exterior (1 Of 2)): DECKLID/Hatch/Liftgate/Tailgate: Panel-Trim: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Position the trim panel (2) to the decklid (1).
- Engage the snap retainers that secure the trim panel to the decklid. Make sure the retainers are fully engaged.
- Install the emergency release handle into the opening in the trim panel.
- Verify decklid operation.